Nikkiso
|
NIKKISO NON-SEAL насос (консервы насоса)
Internal Flow (Circulation)
Low Lifecycle Costs
The need for global environmental protection requires us to conduct lifecycle assessment and reduce lifecycle costs, which are calculated for the entire product life ranging from initial expenses to running and even disposal costs. Nikkiso non-seal pumps achieve these cost reductions by:
- reducing unnecessary inspection and maintenance costs by accurate prediction of inspection and maintenance times using the E monitor
- reducing running costs by lowering power capacity and consumption based on the use of higher efficiency pumps and motors
- reducing utility costs by using models that don’t require cooling
Head-Capacity Envelope
Specifications
Ѓ@
|
Standard |
Semi-Standard |
Max. Capacity |
780m?/h (3,430 gpm) |
1200m?/h (5,280 gpm) |
Max. Head |
300m (984ft) |
600m (1,970ft) |
Fluid Temp. Range |
-60 to 350°C (-76 to 662°F) |
-200 to 450°C (-328 to 842°F) |
Specific Gravity Range |
0.3 to 2.0 |
Max. 13.6 |
Max. Viscosity |
200mPas(200cP) |
500mPas(500cP) |
Max. Working Pressure |
4 MPa (600 psig) |
80 MPa (11,600psig) |
Liquid End Material |
SUS316, SUS304 |
- AlloyЃ@20
- Hastelloy C/B
- Titanium
- Zirconium etc.
|
Motor Power Range |
0.4 to 200kW (0.5 to 268hp) |
200 to 270kW (268 to 360hp) |
100% leak-proof, the Nikkiso Non-Seal Pump (canned motor pump) is ideal for transporting hazardous fluids that can cause serious accidents when leaks occur.
Petrochemical/chemical
- Send out (discharge) pump
- Filling pump
Heat medium transportation
- Heat medium circulation pump
Since the 400°C heat-resistant motor requires no external cooling using a jacket, none of the heat from the heat medium is lost. The heat generated by the motor is also returned to the heat medium for efficient energy use.
Liquefied gas
- LPG send-out pump
- Filling pump
- Truck-mounted pump
Semiconductor
Ideal for use at plants manufacturing pure semiconductor components, particularly areas that should not be exposed to impurities as well as negative-pressure de-airing lines.
|